AUTOOL CT60 Fuel Injector Cleaner – Colombo, Sri Lanka

AUTOOL CT60 Car fuel Injector signal generator 12V Vehicle fuel Injection System Diagnostic tool with 2 Nozzles for Standard & High pressure Fuel Injectors.

AUTOOL CT60 is used to test car injectors to determine if the fuel injectors are stuck, leaking or burning. Multiple pulse outputs can be configured and speed, pulse width, run time and other parameters can be adjusted as required. It is also possible to connect two nozzles for simultaneous operation to compare the spray status and spray angle of the fuel injector.

Features:

1. [High Efficiency]: The CT60 car fuel injector tester can help diagnose fuel injector faults. You can use it to test each injector individually to help identify stuck, leaking or burnt out conditions. In the test process, adjustable speed and pulse amplitude settings help to change the pulse intensity to improve the cleaning efficiency. It can continuously adjust the injection force and drive the fuel injector in different ways.

2. [Special Design]: CT60 is a high pressure injector electronic control equipment, it can work with 12V standard injector as well as high volt injector. AUTOOL CT60 auto injector tester is special design for high volt diesel engine injectors. Furthermore, it can be used with the fuel injector cleaning machine to make the fuel injector clean and have a longer service life.

3. [Widely Application]: The CT60 pulse signal indicator adds a new driving mode to support GDI engine injector which can work with other fuel pressure tester at the same time. Directly powered by 12V car battery, hand-held compact design. Two nozzles can also be connected to work at the same time to compare the atomization state and injection angle. Only one nozzle can be cleaned at a time because the nozzle needs to be cleaned by hand.

4. [Apply for Two Types Injector]: Standard injector – Automotive naturally aspirated injector and DC voltage 12V can drive the solenoid valve in the injector. High volt injector – The turbocharger injector drives the solenoid valve in the injector with a transient voltage of 75V.

5. [Easy Operate]: Install the fuel injector into the fuel injector, turn on the power supply, confirm that the device is connected correctly, introduce the carburetor cleaner into the fuel inlet position of the injector, press the speed + and – key, the tester outputs pulse to the injector, the pulse signal indicator light is on and the injector starts to work.

6. [1-YEAR WARRANTY]

Wholesalers and resellers are most welcome!

Best rate for you!

100% Brand new and high quality

Island wide delivery within 14 days.

In Sri Lanka

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.